Thanks for the delivery and of course for the equipment itself.
The shipment went well and the test-equipment is now here and ready to be used (see picture).
First impression is very good and installation as well as first test run were successful.
Even the swiss plug has been assembled at the power cord. :-)
—— Mr. Martin Kaempf
Dear Anglia,
Thanks for your e-mail!
Yes, we received the Impact hammer 2 days ago! It seems to working well ;)
If there are any further requests, by our side, we will contact you again!
—— Dirk Fleischer
Shipment and delivery went without issue. Equipment is well-constructed and professional looking.
It performs as specified.
Thank you for all of your help, it was a pleasure working with you.
—— Brian Schroeder
Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend
Contact Voltage Dropping Measurement Instrument Electrical Appliance Tester No Screw Terminals Production introduction: Contact voltage drop tester according to the standard IEC 60884-1, GB2099 - 96 is terms ... Read More
IEC60884 Clause 12.2.2 Single Working Station Conductor Damage Degree IEC Testing Device Standard: IEC60884-1 2013 clause 12.2.2, 12.3.10 and figure 11, IEC60669-1, UL486A-B Application: This device is use to ... Read More
IEC60950-1 Annex AA Mandrel Test Device With Three 50N weights IEC60950-1 Annex AA Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming ... Read More
IEC60335-2-14 Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: ... Read More
GB2951 / GB5013 Cable Testing Equipment Microcomputer Tensile Strength Testing Machine Product information: This tensile tester mainframe is high strength single arm structure, adopts AC frequency conversion ... Read More
Drop Test Device To Check The Impact Resistance Performance Of Attachment Plug Product overview: The apparatus is complied with UL 498 SD7.2 item, applied to Check The Impact Resistance Performance Of ... Read More
IPX1 / IPX2 /IPX3 / IPX4Vertical Drip Rain And Oscillating Tube Testing Chamber Product introduction: This equipment is suitable for the test of electrical products which are enclosure and sealed in the rain ... Read More
IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, ... Read More
Needle-Flame Test Apparatus For Fire Hazard Testing - Touch Screen Operation Introduction: The best method for testing electrotechnical products with regard to fire hazard is to duplicate exactly the conditions ... Read More
IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the ... Read More